Air Leg Rock Drill

The air leg rock drill is a highly efficient rock drilling machine. Air leg rock drill has the advantages of small size, light weight and low gas consumption. The air leg rock drill is widely used in rock tunneling and drilling blasting holes in various rock drilling operations. It is important in stone works such as mining, railway, transportation and water conservancy construction machine. The air leg rock drill has an independent strong air blower system for drilling vertical downward blast holes.

Air leg rock drill Precautions
1. The air leg rock drill machine is sealed with anti-rust oil before leaving the factory. It should be removed and cleaned before use. When reassembling, the surface should be coated with lubricating oil before use.
2. When connecting the air pipe, the inside of the pipe must be blown to avoid damage to the machine inside the machine.
3. Before starting the machine, you must carefully check whether the operating mechanism and running parts are assembled correctly and reliably. Fill the oiler with oil and adjust the oil quantity.
4. When the air leg rock drill machine is finished, the water source should be cut off and then run for a while, and the residual water droplets in the machine should be blown to prevent the parts from rusting.
5. commonly used machines, should pay attention to regular maintenance and repair. Check at least once a week to remove dirt from the machine and replace damaged and failed parts.
6. Used machines, if stored for a long time, must be removed, degreased, placed in a cool dry place.