The
pneumatic breaker is powered by compressed air and achieves impact work through impact and control mechanisms. It is also widely used in roads, municipalities and mines because of its convenient carrying, high efficiency and durability, and low cost of air compressors. Broken work. The research and production of pneumatic tools in China originated in the late 1950s. After half a century of development, the pneumatic tool industry has formed a product system with its own characteristics. The eight series of pneumatic tools basically meet the requirements of industrial production and life.
Hand-held pneumatic breaker, including a breaker body, the breaker body includes a start/stop control mechanism, a gas distribution impact mechanism, a shock absorbing mechanism, a boring and locking mechanism, a lubricator and a muffler cover, and the start/stop control mechanism includes a gas joint, a return spring, an intake valve, a push rod and a trigger, one end of the intake joint is mounted with one end of a return spring, and the other end of the return spring is mounted with one end of the intake valve, the intake valve The other end is mounted with one end of the push rod, and a trigger is arranged above the push rod, one end of the trigger is fixed on the shock absorbing mechanism, and the side of the trigger is pressed on the end surface of the push rod away from the intake valve, The gas impact mechanism includes a control valve, an impact piston, a piston guide sleeve, a crucible bracing sleeve, a crucible brazing, a cylinder block, an inlet chamber, an upper air chamber, a lower air chamber air passage, a lower air chamber, an exhaust port, and an air outlet. The cylinder body is a unitary structure, an impact piston is mounted on the inside of the cylinder body, a piston guide sleeve is mounted below the impact piston, and a crucible bracing guide sleeve is mounted under the piston guide sleeve, and the crucible bracing sleeve brazing is installed inside, the cylinder body is composed of The piston is divided into an upper air chamber and a lower air chamber, the side of the cylinder body is provided with an exhaust port, a control valve is mounted on the top of the cylinder body, and the control valve is provided with an intake port, a first air outlet port and a second An air outlet port, the air inlet port is connected with an air inlet chamber, the air inlet chamber is in communication with an air intake joint of the breaker body, the first air outlet port is connected to a lower air chamber passage, and the lower air chamber passage is located at the cylinder a side position of the body, the lower air chamber passage is in communication with a lower air chamber of the cylinder, the second air outlet port is in communication with an upper air chamber of the cylinder body, and a soundproof cover is mounted on an outer side of the cylinder body, There is an air outlet at the bottom. A hammer head is mounted below the cylinder block.
