Safety Step Procedure of Air Leg Rock Drill

When you get your air leg rock drill, regardless you are new user or experienced use please do as the followings:

1. Review the manufacturer's instruction of the air leg rock drill before using rather than go back to the manual after your encounter with some problem. Know your machine before you start to work. This will promote your working efficiency.
2. Wear safety glasses or goggles, or a face shield (with safety glasses or goggles), and, where necessary, safety shoes or boots and hearing protection.
3. Post warning signs where pneumatic rock drill are used. Set up screens or shields in areas where nearby workers may be exposed to flying fragments, chips, dust, and excessive noise.Everyone's safety is the meaning of safety.
4. Ensure that the compressed air supplied to the air leg rock drill is clean and dry. Dust, moisture, and corrosive fumes can damage your drill. An in-line regulator filter and lubricator increases the rock drill's life.
5. Keep air leg rock drill clean and lubricated, and maintain them according to the manufacturers' instructions.
6. Use only the attachments that the manufacturer recommends for the tools you are using.
7. Be careful to prevent hands, feet, or body from injury in case the air leg rock drill slips or the tool breaks.
8. Reduce physical fatigue by supporting heavy tools with a counter-balance wherever possible.