How To Maintain Your Air Leg Rock Drill

Air Leg Rock Drill, aka Pneumatic rock drill, requires daily care to keep in top shape.  Followings are some acknowledges on how to properly maintain pneumatic rock drill with these basic steps.

First of all, materials is big thing,you should have these two materials for maintenance:

1. pneumatic tool oil

2. eye-bolt with long shaft

Then let us start the maintain work:

Step 1: Check for Loose Screws

On a Air Leg Rock Drill, check the safety and the trigger every day to make sure they are moving freely. Then, ensure all the screws are tightened. If the screws are loose, the rock drill will leak, which leads to tool inefficiency and affect your work plan finally.

Step 2:Clean the Feed System

Another part of a pneumatic rock drill that requires daily maintenance is the feed system. The feed system should be smooth all the way forward. For cleaning, wipe off the magazine or blow it out with air rather than using an oily lubricant. The lubricant actually attracts dirt and debris.

Step 3:Lubricate the Air Fitting

Squeeze 4-5 drops of pneumatic tool oil into the air fitting daily . If the tool is used all day, repeat the process halfway through the day. If the tool is not used very often, just oil it when the tool is used.

If the Air Leg Rock Drill has not been well-maintained, it may need to be taken apart to replace her parts

At the end ,be noted that:several O-rings are located inside the tool. Use your finger to spread pneumatic grease on the O-rings to keep them lubricated.