Precautions For Using Air Leg Rock Drill And Gasoline Rock Drill
The Air Leg Rock Drill And Gasoline Rock Drill are mainly used to drill holes with a downward, horizontal and upward angle of less than 45 °. If a few parts are replaced, Air Leg Rock Drill And Gasoline Rock Drill can be changed into a crusher or a compactor for various operations such as shoveling, crushing, digging, splitting and tamping. Since the Air Leg Rock Drill And Gasoline Rock Drill have its own power and produces compressed air to blow blast holes, it is especially suitable for mountain areas, areas without power supply and compressor equipment, and temporary projects with high mobility. It is widely used in open-pit mining, frozen soil excavation, road construction, cable laying and water conservancy construction.
The
Air Leg Rock Drill And Gasoline Rock Drill is mainly used to drill holes with a downward, horizontal and upward angle of less than 45 °. If a few parts are replaced, it can be changed into a crusher or a compactor for various operations such as shoveling, crushing, digging, splitting and tamping. Since the machine has its own power and compressed air to purge blast holes, it is especially suitable for mountain areas, areas without power supply and compressor equipment, and temporary projects with large mobility. It is widely used in open-pit mining, frozen soil excavation, road construction, cable laying and water conservancy construction.
Precautions for
Air Leg Rock Drill And Gasoline Rock Drill
1. When the pneumatic rock drill is started with drill pipe installed, the handle clutch is not allowed to turn to the rotary position.
2. In order to protect the
Air Leg Rock Drill And Gasoline Rock Drill slewing mechanism, the machine shall not be overloaded.
3. When the engine is pneumatic, gently pull the starting rope after the ratchet
Air Leg Rock Drill And Gasoline Rock Drill is engaged. The direction of pulling the starting rope shall be correct, and the force shall not be too strong to prevent the starting rope from pulling out.
4. Since the
Air Leg Rock Drill And Gasoline Rock Drill uses gasoline as the fuel, the exhaust gas will pollute the air. Therefore, in general, it is only allowed to work in the open air.
5. Pay attention to whether the middle hole of the screw rod is blocked to prevent the machine from stalling.
