What Should Be Paid Attention To For Long-term Storage Of Air Leg Rock Drill And Gasoline Rock Drill

What Should Be Paid Attention To For Long-term Storage Of Air Leg Rock Drill And Gasoline Rock Drill

If the Air Leg Rock Drill And Gasoline Rock Drill are not used in the near future, follow-up protective measures must be taken to prevent problems in the future work. So today, Xiao Bian will give friends some suggestions on the storage of Air Leg Rock Drill And Gasoline Rock Drill.

For long-term storage of Air Leg Rock Drill And Gasoline Rock Drill, the following must be achieved:

Park in a dry room. If you have to stop outside, you should choose a flat ground and pave Air Leg Rock Drill And Gasoline Rock Drill with boards. Cover with cloth after parking.

Before long-term storage, the Air Leg Rock Drill And Gasoline Rock Drill must be maintained, damaged parts repaired, and thoroughly cleaned to keep it in good technical condition.

The arrangement and layout at the airport shall ensure that the access of any Air Leg Rock Drill And Gasoline Rock Drill are not affected by other machines.

The fuel control lever of the Air Leg Rock Drill And Gasoline Rock Drill shall be placed in the idle position, and each control lever shall be placed in the neutral position.

Anti rust treatment.

① Before storage, Air Leg Rock Drill And Gasoline Rock Drill shall be determined whether to use paint repair or repaint the whole machine according to the size of the peeling area of the antirust paint on the external surface.

② For the working devices of construction Air Leg Rock Drill And Gasoline Rock Drill, such as the screed of the paver, the bucket of the loader, the scraper of the grader, etc., the anti rust method for the exposed metal is to apply butter.

Storage of Air Leg Rock Drill And Gasoline Rock Drill storage battery.

① The battery shall be removed and placed in a dry and antifreeze place. Keep the surface clean and dry. Do not place conductive objects on the battery. When Air Leg Rock Drill And Gasoline Rock Drill removing the battery, first cut off the negative wire, and then cut off the positive wire; During installation, connect the positive wire first and then the negative wire. Since the electrical system of construction machinery is grounded at the negative pole, this is to prevent short circuit when disassembling and assembling the battery.

② Air Leg Rock Drill And Gasoline Rock Drill Lead acid battery shall be charged once a month.

Storage of the engine.

① Air Leg Rock Drill And Gasoline Rock Drill Drain the cooling water from the engine.

② Air Leg Rock Drill And Gasoline Rock Drill Change the engine oil. The new oil is usually neutral and will not corrode the metal parts of the engine.

③ Air Leg Rock Drill And Gasoline Rock Drill The fuel tank is filled with diesel to avoid rusting. Preservatives shall be added if conditions permit.

④ Air Leg Rock Drill And Gasoline Rock Drill During the shutdown period, the engine shall be started once a month to make the hand-held rock drill run for a short distance, so as to establish a new oil film at the lubricating place of each part to prevent rust. It should be noted that the cooling water should be filled before starting and drained at the end.