Advantages of air leg rock drill

What is an air-leg rock drill? What are the characteristics and advantages of air-leg rock drilling tools? Operators who need to use mining machinery should have an understanding of air-leg rock drills. The air-leg rock drill is suitable for wet drilling of medium-hard or hard rocks; the operating mechanism is centralized.

Air leg rock drills are installed on the air leg, and the operation is performed on the air leg. This is also the standard for the classification of air leg rock drills. The function of the air leg is to support and push the fuselage, which can reduce the operator's labor. The strength and drilling efficiency are naturally higher than other rock drills.

Its rock drilling depth is 2～5m, horizontal diameter is 34～42mm, or blasthole with a certain inclination, which is widely used in mines.

The air-leg rock drill is flexible to start, air-water linkage, easy to use, simple to maintain, energy-saving and high-efficiency, long life of parts, high commonality rate, high reliability, high efficiency, and powerful in blowing blastholes. Compared with similar products, it is better than other products.

Air-leg rock drills have the following models: YT2 ((7655), YT24, YT28, YTP26, etc.).

The air-leg rock drill uses a pneumatic leg instead of manpower to work against the rock drill, thereby greatly reducing the labor intensity of the workers. The main advantage of internal combustion rock drills is that they are easy to carry. When the pneumatic rock drill is working, the air pressure alternately enters the back cavity and the front cavity of the cylinder, pushing the piston to move back and forth. The same pressure also acts on the rear cover or front cover of the cylinder, causing the rock drill to move backward or forward. Therefore, the rock drill vibrates to generate drilling force.