When we operate the
air leg rock drill, we will find it very convenient to use. And the working efficiency of the air-leg rock drill is also higher. At the moment of starting the product, you will find that the start of the air-leg rock drill is very flexible. And the operating mechanism of the product is relatively centralized. Our staff will be more handy during the operation. If some faults occur accidentally during the use of the product, then the maintenance is very simple. Moreover, the life span of some additional parts on the air leg rock drill can also be guaranteed. Air leg rock drill is more reliable in quality and has higher versatility.
The use of
air leg rock drills requires a compressed air dryer for rock drilling. The air pressure should be maintained at 500kPa and not less than 400kPa; clean soft water is required. As a last resort, when acidic or alkaline water is used, the drilling rig completes its application. Inject some lubricating oil, turn off the water and air for a very small time. The new washing machine is reloaded. After the load is opened and empty, check that the operation is normal. However, the empty time cannot exceed 2 to 3 minutes. Too long time, the tank is prone to high air temperature, and it is easy to get the tank. The pipeline cleaning detachment and routine maintenance work are always in good working condition and keep the oil, no oil-free operation. Note that the water should be the first after opening, the wind and water pressure should be lower than the air pressure to prevent the inner cylinder from destroying the normal lubrication drilling water backflow.
Air leg rock drills are often installed on the air leg for operation. The air legs play a role of propulsion and support at this time. Therefore, the labor intensity of our staff has also been reduced to a certain extent.
