Gasoline rock drills should be regularly maintained during use. The quality of gasoline rock drill maintenance determines the performance of the rock drill. The performance of the rock drill directly affects the level of production efficiency. Therefore, the operator must be meticulous about the maintenance of the gasoline rock drill. Disassembly and assembly of gasoline rock drills is an important part of the use process.
1. Operate according to technical requirements:
When disassembling the
gasoline rock drill, special tools and conventional tools must be used, and strictly follow the technical requirements. Otherwise, when disassembling, it is easy to scratch the surface of the parts or the assembly is not correct, the ratio and the power of the gasoline rock drill increase.
2. Tighten the connecting bolt:
When connecting the bolts of a
gasoline rock drill, you must use a torque wrench to tighten them strictly in the order and torque required. Otherwise, the connecting bolts may easily loosen or fall off. Cut out.
3. The sealing ring after disassembly will not be used anymore:
After the sealing ring of the
gasoline rock drill is disassembled, its sealing performance is reduced, and its service life is shortened. If it is reused, it is not conducive to good sealing effect and high level of mechanical power. Because the sealing ring is cheap and easy to replace, the disassembled sealing ring will never be used again, and a new one with a suitable specification and model will be replaced.
4. Strictly prevent dirt from entering the machine during transportation:
Gasoline rock drills should be clean and tidy during transportation to prevent water, air, dust and other impurities from entering the body, and ensure that the inside of the rock drill is not contaminated so that it can be put into use immediately after re-installation.
Gasoline rock drills require technical operation when disassembling, tighten the connecting bolts, the sealing ring after disassembly will not be used any more, and prevent dirt from entering the machine during transportation. In addition, high-efficiency gasoline rock drills need to be well maintained for lubrication, deflation, long-term storage, and regular inspection and cleaning.
