Gasoline rock drills can be used not only in the field of use, but also in mountains, plains and outdoors. Therefore, attention should be paid to the maintenance, maintenance and operation of gasoline rock drills. The following introduces what problems should be paid attention to during the disassembly of gasoline rock drills.
Problems that should be paid attention to when disassembling and assembling petrol rock drills
(1) Wear protective glasses when disassembling the gasoline rock drill to avoid knocking fragments and damaging the eyes;
(2) Pay attention to safety and avoid the parts falling off and hitting the feet suddenly;
(3) When disassembling and disassembling the
gasoline rock drill, the place for disassembling and installing the rock drill should be clean, clean and free of debris;
(4) Light and balanced, no forced disassembly and assembly, damage to parts;
(5) When disassembling the petrol rock drill, pay attention to the assembly position of the original parts to facilitate assembly after maintenance;
(6) Do not use the piston as a hammer.
(7) The removed parts must be properly preserved, and must not be lost or damaged. All parts must be cleaned before assembly. If they are cleaned with kerosene or gasoline, fireworks must be prohibited around to ensure safety.
(8) Accurate inspection of all parts, qualified parts to be installed, repair or replacement of unqualified parts; lubricating grease should be applied to each friction surface before assembly, and the valve core of the gas distribution mechanism should be free to move.
(9) When disassembling the
gasoline rock drill, the two long bolts should be tightened uniformly, and the pre-tightening force should meet the requirements.
