Pneumatic pavement breaker is a kind of pneumatic tool, which is widely used in mining industry and construction industry. But how to reduce the vibration of the crusher handle has become an urgent technical problem to be solved by the labor protection department. Pneumatic road crusher wants to use the long, how to do?
1. When the
pneumatic pavement breaker is equipped with the pickaxe, check the gap between the tail of the pickaxe and the supporting body, then hold the handle and slowly apply pressure to the drill, so that the pickaxe can work normally.
2. When the
pneumatic pavement breaker works normally, lubrication (turbine oil with a viscosity of 3-4.5°E50) is added every 2-3 hours and injected by the connecting pipe.
3. When the
pneumatic pavement breaker strikes the soft ore layer, do not make the drill pick fully inserted into the ore layer for anti-air attack.
4. If the pickaxe is stuck in the rock joint, do not violently shake the air pick to prevent damage to the connected parts.
5. The filter screen of
pneumatic pavement breaker should be removed in time when it is blocked by dirt, and the filter screen should not be removed.
6. During the use of the pneumatic road crusher, remove it at least twice a week, clean it with diesel oil, blow dry it, and coat it with lubricating oil, then carry out assembly and test.
7. If the
pneumatic road crusher stops using for a long time, it should be removed for cleaning, oil seal and storage in the warehouse.
