1. As the engineering
drilling rig is a special vehicle, the operator shall receive the training and guidance from the manufacturer, have a full understanding of the structure and performance of the machine, and obtain certain operation and maintenance experience before operating the machine. The product operation and maintenance manual provided by the manufacturer is the necessary information for the operator to operate the equipment. Before operating the machine, the operator must read the operation and maintenance manual first and carry out operation and maintenance according to the requirements of the manual.
2.
Engineering drilling rig pay attention to regularly check the level and quality of lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water), and pay attention to check the tightness of the whole machine. It is found that there is too much oil and water in the inspection, the reason should be analyzed. At the same time, should strengthen the lubrication of each lubrication point, it is recommended in the run-in period, every shift to the lubrication point with grease (except special requirements).
3.
Engineering drilling rig keep the machine clean, adjust and tighten the loose parts in time, so as to prevent the loose parts from aggravating the wear of the parts or causing the loss of the parts.
4.
Engineering drilling rig pay attention to the working load in the running-in period. The working load in the running-in period shall not exceed 80% of the rated working load, and the appropriate workload shall be arranged to prevent the occurrence of overheating caused by continuous operation of the machine for a long time.
5. Pay attention to frequently observe the indicator of each instrument. If there is any abnormality, stop the operation in time to eliminate it.
In a word, the maintenance requirements of engineering
drilling machines during the run-in period can be summarized as: strengthening training, reducing load, paying attention to inspection and strengthening lubrication. As long as pay attention to and according to the requirements of the implementation of the construction machinery running-in period of maintenance and maintenance, will reduce the occurrence of early failure, extend the service life, improve the efficiency of operation, so that the machine for you to bring more benefits.
