How to start a gasoline rock drill

Gasoline rock drill is a tool used to mine stone directly. It drills blastholes in the rock formations so that explosives can be put in to blast the rocks, thereby completing stone mining or other stonework projects. In addition, the rock drill can also be used as a destroyer to break hard layers such as concrete. Then let the editor come to the eldest sister to introduce how the gasoline rock drill is started!

(1) When the gasoline rock drill engine is pneumatic, pull the starting rope gently after the ratchet mechanism is engaged. Pull the starting rope in the correct direction, and don't use too much force to prevent the starting rope from pulling out. (2) When the gasoline rock drill is started with the drill pipe installed, the handle clutch of the gasoline rock drill is not allowed to turn to the rotating position. (3) Always pay attention to whether the fiber rod hole is blocked, and the machine stalls. (4) In order to protect the slewing mechanism, the machine should not be overloaded. (5) Gasoline rock drills use gasoline as fuel, and the exhaust gas will pollute the air. Therefore, under normal circumstances, it is only allowed to work in the open air.

Gasoline rock drill is a new type of rock drilling machine powered by a low-power internal combustion engine, suitable for field operations without power supply and air compressor. According to work needs, in addition to rock drilling operations, internal combustion gasoline rock drills are generally equipped with more than ten tools (such as grinding wheels, picks, shovels, shovel, etc.) for crushing, shoveling, digging, splitting, tamping, etc. operation.

Gasoline rock drill is a rock drill powered by fuel combustion. It is a hand-held rock drill tool composed of a small gasoline engine, a compressor, and a rock drill. Mainly used for drilling down, horizontal and upward blast holes less than 45°, replacing a few parts, can be changed to a crusher or tamping machine, used for various shoveling, crushing, digging, splitting and tamping work . Because the machine has its own power and self-produced compressed air to blow the blasthole, it is especially suitable for high mountains, areas without power supply, and compressed air equipment, and temporary projects with high mobility. It is widely used in open-pit mining, excavation of frozen soil, road construction, cable laying and water conservancy construction, etc.