Reasons for the improvement of internal combustion gasoline rock drill

The internal combustion gasoline rock drill uses this machine to operate conveniently and with high efficiency, reaching the good level of similar products, and can be completely interchanged with international similar products. The internal combustion rock drill is easy to carry, suitable for high mountains, areas with no power supply, no wind pressure equipment, and temporary projects with high mobility, and has a wide range of adaptability.

Drilling holes in the rock can be drilled vertically downwards and horizontally upwards less than 45°, and the deepest vertical downwards is up to six meters. The YN24C internal combustion type gasoline rock drill has a weight of only 24C kilograms and is easy to carry. It is especially suitable for high mountains, areas with no power supply, no wind pressure equipment, and temporary projects with high mobility. It can work in high mountains, flat ground, in the extreme heat of 40° or the severe cold area of minus 40°. The YN24C internal combustion type rock drill has a wide range of adaptability. There are many varieties of YN internal combustion type gasoline rock drills, and their performances vary. The appropriate model should be selected first when improving.

The gas produced by the compressor of the YN27 internal combustion type gasoline rock drill is blown by the cylinder, enters the head, and discharges powder after passing through the drill rod. After being changed to a tamping machine, this gas will become redundant waste gas, and it is only necessary to drill through the air inlet of the machine head with the outside when it is improved. Note: The drilling direction of the YN internal combustion type gasoline rock drill should be such that the exhaust gas cannot be blown by the machine operator. The torsion mechanism of the YN internal combustion type gasoline rock drill, including the ratchet wheel, needle roller, and support spring, must be removed; the ratchet part of the lead must also be removed, leaving only the guiding and sealing cylinder part; the YN internal combustion type rock drill also only needs to rotate the sleeve parts Keep the hexagonal sleeve and press the hexagonal sleeve directly into the machine head. The interference between the hexagonal sleeve and the nose is kept at 0.06-0.08mm. When pressing the hexagonal sleeve of the YN internal combustion type rock drill into the nose, pay attention to the direction of the hexagon, which should be consistent with the direction of the hexagon of the tail of the tamping tool designed by yourself.

Therefore, you should first choose a model with a more mature performance, and reliable performance will have the foundation; secondly, you should choose a lighter model in terms of weight to reduce the user's labor intensity. The YN24C internal combustion type gasoline rock drill and YN30 internal combustion type gasoline rock drill produced by our company have been tested in the market for many years and are mature and reliable in performance and are considered objects. Because YN27 adopts die-casting shell, beautiful appearance and light weight, it is the main choice for this improvement.