How To Maintain Water Well Drilling Rig

Water well drilling rig are common drilling equipment. Due to the problems of operating environment and time, the loss will be relatively large. Therefore, frequent maintenance and maintenance are required.

Since the water well drilling rig is maintenance, we must first select those components with high loss rate. The first protection object is the filter element. The filter element plays the role of filtering impurities in the oil or gas circuit, preventing it from invading the system and forming problems; The filter elements should be replaced regularly in accordance with the requirements of the (Operation and Protection Manual); when replacing the filter element, you should check whether there is metal attached to the old filter element. If metal particles are found, you should confirm the diagnosis in time and adopt improvement methods;

Then there is the fuel oil for the water well drilling rig, which should be selected according to different environmental temperatures. Diesel fuel should not be mixed with impurities, lime soil and water, otherwise the fuel pump will wear prematurely; the content of wax and sulfur in the residual fuel is high It will cause harm to the engine; after the daily operation of the water well drilling rig, the fuel tank should be filled with fuel to avoid water droplets on the inner wall of the fuel tank; before the daily operation, open the water drain valve at the bottom of the fuel tank to drain the water.